Some designs ask for you to use metallic threads, but they rarely tell you how to use them. For the most part, the pattern makers will usually give you a floss number and style to use, so buying the thread becomes the easy part. However, fraying or difficulty in threading the floss can present difficulties for the newcomer to metallic threads. Here are some tips that will work to keep your stitching trouble-free.
Use a Good Quality Thread
Check before you buy. The thread needs to be strong and have a resistance to unraveling. You should be able to thread it fairly easily. If your metallic thread is on a spool you will want to check and make sure it comes off the spool easily; otherwise, the thread may stretch or break.
Needle Threading
One task that causes the most fraying when using metallic thread is when you have to thread the needle. You should choose a needle with a larger eye so that it is easier to thread. Also, you can try folding the thread over so it forms a loop and putting the end of the loop through the eye of the needle.
Use a Larger Needle
One type of thread known for unraveling is the chainette. When the thread unravels it can leave unsightly threads dangling from the project. Therefore, it is helpful to use a larger needle and a straight up and down motion with this type of metallic thread. The up and down motion keeps the thread from being dragged across the fabric. The larger needle creates a bigger hole so that there is less friction on the thread. Less friction means less fraying.
Cutting vs. Breaking
Some stitchers swear by breaking the ends of the metallic thread versus cutting it. They believe that the thread frays less when it is broken rather than cut. Also, make sure you use shorter lengths of thread than you would normally use for your floss. This way there will be less friction on the floss over time.
Chemicals
While a larger needle and breaking may work for you, they may not be the best solutions for every project. There are chemicals like Fray Check or Thread Heaven that keep the metallic thread from fraying. If you cannot find the product at your local craft store you can also use a clear fingernail polish at the ends of the thread
I'm Going "Fray"zy
Is your thread fraying as you go along? Make sure you check your thread periodically for any fraying. If the unraveled yarn gets buried in your project it can ruin a clean effect by making it look fuzzy. Try using the chemicals or use a new piece of thread. If your metallic yarn unravels then cut ahead of the raveled part and re-thread the needle.
Use Another Type of Metallic
Many people use a filament for the metallic effects. It is more versatile and can be used on top of stitches or intertwined with the floss. However, if a blending filament does not work for you consider metallic cord. It is heavier than metallic filament, and it also does not bend as easily, but if fraying is your problem it may be a better choice.
Save the Best for Last
Metallic threads add that special touch to any project. If you want certain areas of your project to really stand out, metallic thread draws the eye to that area. Yet the thread tends to be more challenging to work with, so you will want to save it for the last part of your cross stitch project. This way all of your other work is done and you can minimize the friction on your metallic thread. It will minimize fraying and add a polished finish to your project.
